air chiller

air chiller :

The air cooled screw cold (hot) water chiller is an integrated heating cooling double purposed central air conditioner that takes air as cold (hot) medium.

It can heat effectively under minus 10, and found an increasingly wide application in regions where yearly conditioned air is available, but small load in winter and lack of water. Especially suitable in the region where the air temp is relative low and no boiler or other heater.

The ultra-low temp air cooled cold/hot water chiller was co-developed by tsinghua University and our company, and can run at -20 working condition. The COP value is 2.15 when the ambient temp is -15. It has a higher energy efficiency ratio when running at low temp working condition.

Air Chiller & Air Cooled Chiller & chiller 

Features:
1. International advanced scroll compressor or piston compressor.
2. A stainless steel water tank installed in the unit.
3. High efficiency, Low noise centrifugal water pump.
4. The unit has double refrigerating circuit.
5. Small chiller has caster on chassis for easy manoeuvrability.

Safety pressure switches on high pressure (005÷930) and low pressure sides (022÷930);
Pressure connections for charging and discharging refrigerant fluid;
Clearly visible dual scale pressure gauges (opt);
Condenser coil protective guard;
Electrical panel ventilation (opt.);
Pre-painted condenser coils (opt.);
Built-in free cooling coils (ECF);
Heating pump (ECH);
Check valve (opt.);
Cycle inversion valve (opt.);
Phase advancing condensers (opt.).

industrial chiller (air cooling, air cooled chiller, air cooler, industrial air chiller) pneumatic cylinder