Inquiry Basket > > > > Inquiry Now
Translate this page Inquiry Basket SiteMap
product detail
  • Product Name： Dual-temp mold water circulation controller
  • Model No： RTC series
  • OR
Description:

Technical Specifications:

Model Temp(℃) Cooling type Heat power (KW) pump power (KW) Max.flow (L/MIN) Max.pressure (Bar) Joints of mould (Inch) Extermal size
H×W×L(mm)		 Weight (kg)
RTC-630W 120
Water		 Direct
cooling		 6 0.5 30 3.5 3/8"(2×2) 650×300×850 60
RTC-950W 9 0.75 45 3.5 3/8"(2×2) 650×300×850 65
RTC-1290W 12 1.5 90 4 3/8"(4×2) 700×300×850 85
RTC-630W-D 6×2 0.5×2 30×2 3.5 3/8"(2×2X2) 650×600×850 100
RTC-950W-D 9×2 0.75×2 45×2 3.5 3/8"(2×2X2) 650×600×850 110
RTC-1290W-D 12×2 1.5×2 90×2 4 3/8"(4×2X2) 700×600×850 145
RTC-630 200
Oil		 Indirect
cooling		 6 0.5 30 3.5 3/8"(2×2) 650×300×850 64
RTC-950 9 0.75 45 3.5 3/8"(2×2) 650×300×850 69
RTC-1290 12 1.5 90 4 3/8"(4×2) 800×350×850 90
RTC-630-D 6×2 0.5×2 30×2 3.5 3/8"(2×2X2) 650×600×850 110
RTC-950-D 9×2 0.75×2 45×2 3.5 3/8"(2×2X2) 650×600×850 120
RTC-1290-D 12×2 1.5×2 90×2 4 3/8"(4×2X2) 800×700×850 155

The reterence for mould automatic temperature control machine selection
Mould clamping force of plastic injection machine(T)
under 50
50-100
100-200
200-300
300-650
above 650
Molding capacity(Kg/hr)
under 6
6-12
12-25
25-40
40-80
above 80
The flow of pump(L/min)
under 30
30
30
40
60
above 100

Please excuse for not note if some specification of products are changed.

Note：
1）"D"is double section.
2） The voltage Specification Of Machine is 3∮，220V/380V，50/60Hz.
3）"W"indicate water-type controller.

related products