Inquiry Basket > > > > Inquiry Now
Translate this page Inquiry Basket SiteMap
product detail
  • Product Name： Air-cooled industrial chiller
  • Model No： RCM series
  • OR
Description:

RCM series industrial chillers are widely used in plastic industry，foodstuff，electronic products，ultrasonics,dyeing and plating industry and so on.As for Air-cooled Chilling，the principle of heat exchange is adopted for cooling. Good quality，newly designed and easy operated chillers can accurately control various mould’s temperature，accelerate product-molding and decrease processing cycle.

Features:
  1.cooling temperature range 5-35 centigrade temperature.
  2. High-capacity tube-in-shell evaporater with very good heat exchange performance especially under high ambient temperature condition.The heat exchange power is：15KW
  3.Tube-fin double condensers with excellent heat transfer and rapid cooling.The efficiency of condensers is 17.5KW
  4. Stainless steel warm-keeping water tank.
  5. Overload protection for compressor, pump and blower.
  6. Warm-keeping design for all piping to avoid partial convection.
  7. Independent temperature controller, anti-freeze protection.
  8. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
  9. R22 refrigerant to be used for efficient cooling.
  10. R407 environment-friendly refrigerant is optional to use. Technical Specifications:

Model Chilling capacity Compressor output power
(HP)		 Refrigerant Evaporator Condenser
Blower's Power (L)		 Water tank capa (KW)
KW Kcal /hr
RCM-3A 7.5 6500 3 R22
R407C		 Tube-in-
shell type		 Tube-fin-
shell type		 45 0.75
RCM-4A 10 9000 4
RCM-5A 13.5 11500 5
RCM-8A 20 16500 8 85 1.1
RCM-10A 25.5 22000 10
RCM-12.5A 31.5 27000 12.5 150 2.2
RCM-15A 38.5 33000 15
RCM- 20A 50 44000 20 180 2.2
RCM-25A 62.5 54000 25 200
RCM-30A 77.5 66500 30 280

 

Model Pump power (KW) Pump max.
pressure
(kg/cm)		 Outlet Tube Size Inlet Tube Size Dain Outlet Size Overflowing Opening Gross Weight (KG) External Size for A Type W×L×H
RCM- 3A 0.75 2.0 1"×1 1"×1 1/2" 1/2" 120 750×1440×1350
RCM-4A 140
RCM-5A 170
RCM-8A 1.1 1 1/2" 1 1/2" 220 800×1600×1500
RCM-10A 280
RCM-12.5A 2.2 2" 2" 350 900×1700×1700
RCM-15A 400
RCM- 20A 2.2 2 1/2" 2 1/2" 450 1000×2800×2000
RCM-25A 550
RCM-30A 600

Please excuse for not note if some specifications of products are changed.

Note:
1) The cooling capactity is measured when the outgoing water temperature is 12℃ and ambient temperature is 30℃.
2) The refrigerant can use R407. For coding, use “N”. For example, RCM-10W-N.
3) The stardard voltage is 3, 220V/380V, 50/60Hz. We also can make it as your requirments.